$requestType
$attrFilterListType
Leach™ Alpha III Rear Loader, New Equipment, CNG, Electric Fuel, 14 to 32 cu-yd Body, 2150 psi
This item has special delivery requirements
Please contact Owen Companies to order
| Body Capacity | : | 14 to 32 cu-yd |
| Body Floor Thickness | : | 5/16 in |
| Body Side Wall Thickness | : | 10 ga |
| Body Type | : | 1-Piece |
| Compaction Ratio | : | 900 lb/cu-yd |
| Condition | : | New |
| Dimensions | : | 230 to 363 in L x 102 in W x 154 in H |
| Ejector Cylinder Specification | : | 1 to 5 Stages, 4-1/2 to 7-1/2 in Bore, 43 to 170-5/16 in Stroke |
| Fuel Type | : | CNG, Electric |
| Hopper Capacity | : | 3 cu-yd |
| Hydraulic Pressure | : | 2150 psi |
| Hydraulic Pump Type | : | Vane |
| Hydraulic Tank Capacity | : | 50 gal |
| Model | : | Alpha III |
| Packer Cylinder Specification | : | 4-1/2 in Bore, 2-1/2 in Rod, 32-1/2 in Stroke |
| Packing Cycle Time | : | 24 s |
| Tailgate Cylinder Specification | : | 4 in Bore, 3-1/2 in Rod, 32-11/16 in Stroke |
The Leach Alpha™ III is the strongest mid-range rear loader that more operators ask for than any other truck. With its standard 3.0 cu-yd hopper, load sill 5" below the chassis frame, and a packing cycle time as fast as 19 seconds, it's no wonder the Leach Alpha-III™ is labeled as a favorite.
Leach™ Rear Loader, Model: Alpha III, New Condition, CNG, Electric Fuel, 14 to 32 cu-yd Body Capacity, 3 cu-yd Hopper Capacity, Compaction Ratio: 900 lb/cu-yd, 24 s Packing Cycle Time, 50 gal Hydraulic Tank Capacity, 2150 psi Hydraulic, Vane Hydraulic Pump, Ejector Cylinder Specification: 1 to 5 Stages, 4-1/2 to 7-1/2 in Bore, 43 to 170-5/16 in Stroke, Packer Cylinder Specification: 4-1/2 in Bore, 2-1/2 in Rod, 32-1/2 in Stroke, Tailgate Cylinder Specification: 4 in Bore, 3-1/2 in Rod, 32-11/16 in Stroke, 5/16 in Body Floor Thickness, 10 ga Body Side Wall Thickness, 1-Piece Body, 230 to 363 in L x 102 in W x 154 in H
- TROUGH FLOOR DESIGN - The Leach Alpha™ III single piece floor trough design has stood the test of time, and it is the thickest standard floor in the industry. This unique trough forms a natural sump, which can hold up to 300 gallons of liquid
- DIAMOND FORCE COMPACTION - Our Diamond Force Compaction design on the push-out panel evenly distributes trash during packing and minimizes voids in the payload. This results in a compaction rating of a minimum of 1,000 lbs per cubic yard (Compaction ratios will vary based on commodity and environmental factors)
- High QUALITY Paint & Welding - The body and the tailgate's surfaces are grit blasted, primed and painted before assembly. This method of painting before assembly prevents bare metal-to-metal contact which will inevitably cause corrosion
- INTERCHANGEABLE PACKER CYLINDERS - The Alpha™ III is the only rear loader that is equipped with interchangeable packer and carrier cylinders, reducing the number of cylinder parts needed to be kept in inventory for maintenance purposes
- SINGLE PIECE BODY SIDE SHEET - Leach™ units feature a single piece of Abrasion Resistant steel in their body wall construction for increased strength and the fewest number of welded seams possible. Reducing welded seams results in Fewer points for corrosion and extends the life of the body. These seamless body sides also provide the perfect surface for branding, graphics, and sign boards
- EV OR CNG POWERED - The need for alternative energy is real. Meet that need with Leach's proprietary CNG system or seamless integration to a Battery-Electric chassis. For thoroughly engineered alternative energy solutions, the answer is always Leach
- 14 cu-yd to 32 cu-yd body sizes
- Large 3.0 cu-yd hopper
- Low load sill height of 5" below frame
- Largest hopper sweep
- Residential and Light Commercial packages available
