$requestType
$attrFilterListType
Leach™ 2R-III Rear Loader, New Equipment, CNG, Electric Fuel, 20 to 32 cu-yd Body, 2300 psi
This item has special delivery requirements
Please contact Owen Companies to order
| Body Capacity | : | 20 to 32 cu-yd |
| Body Floor Thickness | : | 5/16 in |
| Body Material | : | Steel |
| Body Side Wall Thickness | : | 10 ga |
| Compaction Ratio | : | 1000 lb/cu-yd |
| Condition | : | New |
| Dimensions | : | 279 to 357 in L x 102 in W x 184 in H |
| Ejector Cylinder Specification | : | 3 to 5 Stages, 6-1/2 to 7-1/2 in Bore, 94-1/4 to 147-7/8 in Stroke |
| Fuel Type | : | CNG, Electric |
| Hopper Capacity | : | 3.5 cu-yd |
| Hopper Material | : | Steel |
| Hydraulic Pressure | : | 2300 psi |
| Hydraulic Pump Type | : | Vane |
| Hydraulic Tank Capacity | : | 50 gal |
| Model | : | 2R-III |
| Packer Cylinder Specification | : | 5-1/2 in Bore, 4-1/2 in Rod, 30-5/16 in Stroke |
| Packing Cycle Time | : | 26 s |
| Tailgate Cylinder Specification | : | 4 in Bore, 3-1/2 in Rod, 32-11/16 in Stroke |
Proven time and time again, the 2R-III rear loader can handle anything that the industry throws at it, from everyday refuse to heavyduty construction materials. Suitable for residential, commercial, and demolition collection, the 2R-III is the most versatile rear loader on the market.
Leach™ Rear Loader, Model: 2R-III, New Condition, CNG, Electric Fuel, 20 to 32 cu-yd Body Capacity, 3.5 cu-yd Hopper Capacity, Compaction Ratio: 1000 lb/cu-yd, 26 s Packing Cycle Time, 50 gal Hydraulic Tank Capacity, 2300 psi Hydraulic, Vane Hydraulic Pump, Ejector Cylinder Specification: 3 to 5 Stages, 6-1/2 to 7-1/2 in Bore, 94-1/4 to 147-7/8 in Stroke, Packer Cylinder Specification: 5-1/2 in Bore, 4-1/2 in Rod, 30-5/16 in Stroke, Tailgate Cylinder Specification: 4 in Bore, 3-1/2 in Rod, 32-11/16 in Stroke, Steel Body, Steel Hopper, 5/16 in Body Floor Thickness, 10 ga Body Side Wall Thickness, 279 to 357 in L x 102 in W x 184 in H
- Industry leader for over 125 years - Day after day, Leach™ rear loaders won't let you down; they are built strong and ready to tackle even the most demanding routes. Leach™ is incredibly proud of the quality and productivity that come standard with every unit
- ANGLED EJECTOR CYLINDER - The telescopic ejector cylinder is installed at an upward angle, keeping it away from debris, and directing compaction forces away from the body floor and towards its front mount location
- THICKEST BODY FLOOR - At 5/16" in the center and 1/4" on each side, Leach™ units boast the thickest standard floor in the industry. The unique trough design also adds to the overall structural integrity, which prevents the need for additional cross-members for extra support
- LARGEST HOPPER SWEEP - The largest hopper sweep in the industry, combined with 5.5" and 4.5" hydraulic cylinders, allow operators to fill the hopper with more waste, cycle the packer less, and still compact more payload
- CHROMIUM SLIDE SHOES - Carrier panel slide shoes operate within an upper and a lower rail lined with standard Chromium carbide wear plates. Chromium carbide wear components easily outperform even the highest grades of AR450 for the longest service life possible. The slide shoes have greaseable pins, with lubrication points accessible through external access openings for easy maintenance
- EV OR CNG POWERED - The need for alternative energy is real. Meet that need with Leach's proprietary CNG system or seamless integration to a Battery-Electric chassis. For thoroughly engineered alternative energy solutions, the answer is always Leach
- 20 cu-yd to 32 cu-yd body sizes available
- Up to 1000 lbs/cu-ydcompaction
- Large 3.5 cu-yd hopper
- Fully Integrated Labrie CNG systems - roof, frame and back of cab mount - 50 to 100 DGE available
- 5.5" packer/carrier operating cylinders
