Gates® 71034767 751373

$requestType

$attrFilterListType

Gates® MegaCrimp™ 71034767 90 deg Coupling, 7/8 in Female SAE 37 deg JIC Swivel x 7/8 in Female SAE 37 deg JIC Swivel

Manufacturer: Gates Corp
Brand: Gates®
Item Number: 751373
MPN: 71034767
CPN:
Model #: G25179-1010X
  • Santa Fe Springs, CA
    Additional Information      :      0.626 in ID Hose
    Connection Size 1      :      7/8 in
    Connection Size 2      :      7/8 in
    Connection Type 1      :      Female SAE 37 deg JIC Swivel
    Connection Type 2      :      Female SAE 37 deg JIC Swivel
    Connection Type      :      Female JIC Swivel|Female JIC Swivel
    Cut-Off Factor      :      2.028 in
    Dimensions      :      3.504 in L
    Divisions      :      BLAZE
    Divisions      :      JR
    Divisions      :      OWEN
    Divisions      :      RELIANCE
    Finish      :      TuffCoat™
    Fitting Type      :      90 deg Coupling
    For Use With      :      1-Wire and 2-Wire Braid Hydraulic Hoses
    Hex Size      :      1.063 in
    Hose Dash Size      :      #10
    Material Construction      :      Steel
    Material      :      Steel
    Thread Size      :      7/8-14

    MegaCrimp™ couplings give you a leak-proof seal that's so innovative, it's patented. It's what's inside the MegaCrimp coupling that makes it perform so well, the "C" insert. This "C" insert allows usage with different constructions and wall thickness. In addition, the "C" insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one and two-wire hoses. An additional bonus: MegaCrimp couplings are a fully qualified EN-performance coupling.

    Gates® 90 deg Coupling, 90 deg Coupling Fitting, 7/8 in Connection Size 1, Female SAE 37 deg JIC Swivel Connection Type 1, 7/8 in Connection Size 2, Female SAE 37 deg JIC Swivel Connection Type 2, Female JIC Swivel|Female JIC Swivel Connection Type, #10 Hose Dash Size, 2.028 in Cut-Off Factor, Steel, Steel Material Construction, TuffCoat™, 7/8-14 Thread, 1.063 in Hex, For Use With: 1-Wire and 2-Wire Braid Hydraulic Hoses, 3.504 in L, Additional Information: 0.626 in ID Hose

      One of the most common causes of hydraulic leaks is a cracked coupling nut or seat due to over-torquing by a strong-armed worker. Gates® has engineered a solution - Full-Torque Nut™ technology now available on Gates® MegaCrimp™ and GlobalSpiral™ couplings.

    back To Top