$requestType
$attrFilterListType
| Construction | : | Cogged |
| Material | : | EPDM |
| Number of Ribs | : | 1 |
| Outside Length | : | 80.44 in |
| Section Size | : | 5VX |
| Temperature Rating | : | -30 to 60 deg C |
| Thickness | : | 0.53 in |
| Top Width | : | 0.59 in |
When your power transmission application needs a high-horsepower solution but is constrained by drive weight or physical space, the answer is Super HC® molded notch belts. Our proprietary construction process provides a superior combination of flex and load carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC® MN V-belts put more power where high-speeds, high-speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts. Developed through specialized research, Super HC® MN is highly recommended for use on all industrial heavy-duty, narrow section V-belt drives. With an increased transmission efficiency this belt allows for a more compact and highly economical drive design.
Gates® V-Belt, Series, Model, Section Size 5VX, Outside Length 80.44, Top Width 0.59 in, Thickness 0.53 in, Pitch Length in, Rib Width, Angle, Load Capacity, Pulley Diameter, Number of Ribs 1, Construction Cogged, Reinforced Material, Resists, Material EPDM, Temperature Rating -30 to 60, Color deg C, Finish, Domestic/Import, Suitable For Use With, Additional Information
- Flex-bonded tensile cords are vulcanized as one solid unit making the belt highly-resistant to tensile and flexing forces, fatigue and shock loads
- Precision-ground straight sidewalls give a uniform wedging action and ensure the belt fits correctly in the pulley grooves
- Molded notches reduce and evenly distribute thermal and bending stresses
- Machined belt edge provides maximum sheave groove contact for even wear and extended belt life
- Proprietary Flex-Weave® cover protects the belt's interior from oil, contaminants and heat
- Promotes smoother, quieter operation, with less slippage and belt wear
- Elastomeric compound protects the belt against heat, ozone and sunlight
- Even with severe slippage, the belt will not catch fire from heat build-up
- Designed for high horsepower, space-constrained applications
- Improved belt life reducing expensive maintenance time
- Optimally constructed for small sheave diameter drives
- The molded notch pattern also reduces noise
- More compact design compared to classical section V-belts
- Cost and space savings by reducing size of pulleys, bearings, guards and mounts
- All sizes meet Gates UNISET tolerances, they can be installed without matching