$requestType
$attrFilterListType
| Additional Information | : | Bolt-On Cap |
| Specifications | : | 8 on 6-1/2 in Bolt Pattern, 4-3/4 in Dia Hub Drum Pilot |
| Suitable For Use With | : | DEXTER® 9000 lb, 10000 lb Axles, DEXTER® #13G Hubs and 12-1/4 x 3-3/8 in Brakes |
Dexter hub & drum. This redesigned two piece hub & drum will work as a direct replacement for the one piece(8-415-2) hub & drums that were used between 7/2009 and 4/2013. This two piece design comes standard on Dexter axles made after 04/2013. There is no need to worry about the races as they are already pressed into the hub for you. The oil seal, bearings, oil cap, wheel nuts and retaining ring for the hub are sold separately. This hub is designed for use with 9-10K GD axle spindles. Each hub has a capacity if 5,000lbs. The 12-1/4" x 3-3/8" drum is already mounted to the hub for ease of installation. Spindle nut and washer sold separately.
Dexter® Hub and Drum With Stud and Race, Specifications: 8 on 6-1/2 in Bolt Pattern, 4-3/4 in Dia Hub Drum Pilot, For Use With: Dexter® 9000 lb, 10000 lb Axles, Dexter® #13G Hubs and 12-1/4 x 3-3/8 in Brakes, Bolt-On Cap
- 1 382A Inner Race (Already Pressed In) 3.813 OD
- 1 25520 Outer Race (Already Pressed In) 3.265" OD
- 1 8 on 6.5" Hub only
- 5,000lb Capacity Per Hub
- 1 12-1/4" x 3-3/8" drum installed