$requestType
$attrFilterListType
| Finish | : | Painted |
| Specifications | : | 8 on 6-1/2 in Bolt Pattern, 9/16 in Stud Size, 2-3/4 in ID Seal, 18 TPI, #42 Spindle Size |
| Suitable For Use With | : | DEXTER® 7000 lb Axles and 12 x 2 in Brakes |
This hub & drum is designed for use with a #42 spindle. Each hub & drum has a capacity of 3,500lbs. Hub & drum uses 25580 inner bearing and a 14125A outer bearing(sold separately). The bearings, grease seal, grease cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.
Dexter® Hub and Drum With Stud and Race, Painted, Specifications: 8 on 6-1/2 in Bolt Pattern, 9/16 in Stud Size, 2-3/4 in ID Seal, 18 TPI, #42 Spindle Size, For Use With: Dexter® 7000 lb Axles and 12 x 2 in Brakes
- 1 25520 Race (Already Pressed In)
- 1 14276 Race (Already Pressed In)
- 9/16" Studs (Already Pressed In)
- Uses 25580 and 14125A bearings (sold separately)
- 8 on 6.5" Bolt Pattern
- Use with a 12" x 2" brake