$requestType
$attrFilterListType
| Finish | : | Painted |
| Specifications | : | 8 on 6-1/2 in Bolt Pattern, 1/2 in Stud Size, 2-3/4 in ID Seal, 20 TPI, #42 Spindle |
| Suitable For Use With | : | DEXTER® 5200 lb, 7000 lb Axles and 12 x 2 in Brakes |
This hub & drum is designed for use with a #42 spindle. Each hub & drum has a capacity of 3,500 lbs. Hub & drum uses 25580 inner bearing and a 14125A outer bearing(sold separately). The bearings, grease seal, grease cap, wheel nuts, spindle nut, and spindle washer sold separately. Kit with hardware is available.
Dexter® Hub and Drum With Stud and Race, Painted, Specifications: 8 on 6-1/2 in Bolt Pattern, 1/2 in Stud Size, 2-3/4 in ID Seal, 20 TPI, #42 Spindle, For Use With: Dexter® 5200 lb, 7000 lb Axles and 12 x 2 in Brakes
- 1 25520 Race (Already Pressed In) 3.265" OD
- 1 14276 Race (Already Pressed In) 2.717" OD
- 1/2" Studs (Already Pressed In)
- Uses 25580(1.75" ID) and 14125A(1.25" ID) bearings (sold separately)
- 8 on 6.5" Bolt Pattern
- Use with a 12" x 2" brake