BRENNAN 6602-16-16-16-FG Run Tee, 1 in Male SAE 37 deg JIC Flare x 1 in Female SAE 37 deg JIC Flare Swivel x 1 in, Steel

Brennan 37 deg JIC tube fittings are manufactured to SAE J514 and ISO 8434-2, the recognized global standards for flare fittings. These fittings are used in two primary ways: to connect tubing that has been flared to 37 deg with a nut and sleeve, or to mate directly with another JIC fitting of the same size and seat angle. Their versatility and consistent performance have made them one of the most widely applied hydraulic connections. For tube connections, the installer flares the tube end to 37 deg, positions it against the fitting nose, and secures it between the nose and sleeve by tightening the nut. The three-piece design of body, sleeve, and nut forms a compact joint with a small sealing area, which provides low assembly torque and relatively high pressure capability. When two JIC fittings are connected, the seal forms directly between the opposing 37 deg seats without the need for a sleeve and nut. JIC adapters are also used to transition to other port styles, including SAE straight thread O-ring Boss, NPT/NPTF pipe threads, BSPP and BSPT threads, ISO 6149 ports, and metric connections. This adaptability allows JIC fittings to connect tubing, hoses, and ports across a wide range of systems worldwide. Brennan JIC fittings are available in unplated steel, zinc plated steel, zinc-nickel plated steel, brass, and stainless steel for use in different pressure, corrosion, and environmental conditions.

BRENNAN Run Tee, 6602-FG Series, Tee Fitting, 1 in Connection Size 1, Connection Type 1: Male SAE 37 deg JIC Flare, 1 in Connection Size 2, Connection Type 2: Female SAE 37 deg JIC Flare Swivel, Connection Size 3: 1 in, Connection Type 3: Male SAE 37 deg JIC Flare, Male JIC|Female JIC Swivel|Male JIC Connection, Steel, Material Construction: AISI 1045 Steel, Finish: Trivalent Zinc-Plated, 1-5/16-12 x 1-5/16-12 x 1-5/16-12 Thread, 1.5 x 1.312 in Hex, Dimension Standards: MS 51523, SAE J514, 3.81 in L, 4000 psi Maximum Operating Pressure, -65 to 500 deg F Operating Temperature, Additional Information: Corrosion-Resistant